50HP I wish.... the P&P was only for an efficiency gain on this turbo and it's still truly unproven until I hit the dyno (enter comments about it taking forever). If anything it should allow the turbo to acheive targeted boost levels a little easier which in turn should create less heat/wear. The ceramic coating is a nice treatment which technically should reduce the ambient exhaust side heat from affecting the compressor heat. In addition the ceramic coating and turbo blanket have reduced bay temps which can lower intake temps. All of these factors together could lead to a few HP.
True. I forgot about the ceramic coating and the blanket. All of the little things together will probably do SOMETHING for power. Less heat all around is never a bad thing for sure :thumbsup: