i do not have such a gauge but have heard of this happening. might be clogged filter?
the outlet itself or the wiring to it? i imagine the outlet itself is easier than the wiring. try a different charging cable too?
So I have 2 dumb questions...
1.) People with boost gauge, have you guys ever have the hose coming off the in-line filter when you hit peak boost? Mine has been doing that lately, it used to be fine... I have a Podi gauge
2.) anyone knows how hard is it to replace the 12V power outlet? I think there’s a shirt in mine because everytime I try to plug my phone charger in it blew the fuse
Sent from my iPhone using Tapatalk
And I’m pretty sure it’s the outlet itself that is shorting out, I’ve tried different charger and they all blew the fuse
I had to double zip tie mine. The increase in boost levels proved to be a match for a single zip tie. Also, use some pliers to close the zip tie on the hose.
Sent from my SM-G960U using Tapatalk
Might be a stupid question, but there's nothing sitting at the bottom of the outlet is there? I had a penny fall into one once and everytime I tried to put my charger into it the fuse would blow.
Might be a stupid question, but there's nothing sitting at the bottom of the outlet is there? I had a penny fall into one once and everytime I tried to put my charger into it the fuse would blow.
Might be a stupid question, but there's nothing sitting at the bottom of the outlet is there? I had a penny fall into one once and everytime I tried to put my charger into it the fuse would blow.
Shop said it would need to remove my axle to put my downpipe in? Is this true? I had them quote me a price and they mentioned it. Ill probably do it with some friends, but was wondering if their claim is true.
Shop said it would need to remove my axle to put my downpipe in? Is this true? I had them quote me a price and they mentioned it. Ill probably do it with some friends, but was wondering if their claim is true.
Definitely not. I've installed dozens of downpipes for people and never removed them or saw any need. They aren't in the way what so ever. I'd prob research a different shop.
Ive never heard or done that before. Even with snapping 2 studs, the axle didn't have to come out
Sent from my XT1635-01 using Tapatalk