P1NDLESK1N
Ready to race!
What turbo/setup do you have?
GT3071R with Carbonio intake, APR tuned.
What turbo/setup do you have?
GT3071R with Carbonio intake, APR tuned.
The only one im aware of was on the MaxR and was cast, just powder coated black.
I'm just doing drop in rods as well. People who did this; did you touch your main bearings at all? No one makes any aftermarket mains for our engine. OEM ones are also $300. I know at least one person who just kept existing bearings in place, is that the norm?
Anyone down to do a big turbo get together and cruise on Friday at H20i? Figure meet go for a cruise then stop somewhere in OC on the way back and shoot the s*** for a bit.
This would be open to all big turbo vw/audi's , all truly come not like they would be kicked out or couldn't do the cruise.
If yes and you have a route idea post it up.
Anyone down to do a big turbo get together and cruise on Friday at H20i? Figure meet go for a cruise then stop somewhere in OC on the way back and shoot the s*** for a bit.
This would be open to all big turbo vw/audi's , all truly come not like they would be kicked out or couldn't do the cruise.
If yes and you have a route idea post it up.
yep. idk why i thought i remembered it having the same finish as their intake.
http://www.golfmk6.com/forums/showthread.php?t=63054
like i said man i don't think you would need to touch it at all. with the head and oil pan off all you do is unbolt the rods from the crank.
down. but i've never been so i know nothing about locations. i can ask my buddy what he thinks.
Im down... just be mindful of us slower, less powerful guys :wub:
Sounds good, yea not trying to loose you guys lol. Just fun cruise so its just not sitting in a parking lot seeing if you can fit a piece of paper under the car or not..... we can do that after and just hang out.
Yes. ... Def down for thisSounds good, yea not trying to loose you guys lol. Just fun cruise so its just not sitting in a parking lot seeing if you can fit a piece of paper under the car or not..... we can do that after and just hang out.
I think I have my dyno somewhere with the flaps help "open" there was a noticeable dip or flat spot in the torque curve. It probably feels amazing because its not smooth, it comes in slower then a big rush of power
The flaps are a non issue on a dyno as they open as soon as you go WOT(they open at ~25% throttle valve position), so unless you're casual driving on the dyno, then I don't see how it would affect it. Also as a person who has driven with the flaps open for a while, I'll beg to differ that it's not smoother and slower in the lower end
you mean studs? i believe i did the same as oem on mine. there's a screenshot from the bentley a few posts back.
Anyone know the torque specs on my arp head bolts?